Welcome to QuickSet
Reduce seat pain. Ride longer. Feel better.
QuickSet is built for real rides that last longer.
Whether this is your seat or you are just checking it out, this page has what you need.
What You Are Looking At
QuickSet is an adjustable-width, tool-free bike seat designed to help you ride farther with less pain. When pressure builds during a ride, you change the width in seconds instead of pushing through discomfort.
Pull. Slide. Click. Adjust width mid-ride in seconds.
Fixed-width seats keep the same contact points the entire time you ride. Pressure builds in one area, numbness sets in, and soft tissue is compressed. Changing the width shifts contact to fresh tissue, giving those hot spots a break.
If You Own This Seat, Start Here
Set it up once, then fine-tune width as you ride. Small adjustments often make a big difference.
1. Basic Setup
- Set your seat height so your leg has a slight bend at the bottom of the pedal stroke.
- Keep the seat roughly level front to back to start. You can tilt a few degrees if needed.
- Center the seat on the rails so you feel balanced over the pedals.
Dial in height and angle first, then fine-tune the width on the ride.
2. Adjusting Width on the Ride
As you ride, if you feel pressure building or numbness starting, that is your cue to change width instead of ending the ride early.
- Sport — narrower, more streamlined feel
- Casual — balanced everyday comfort
- Cruiser — more support for relaxed, upright riding
To adjust: pull the plunger knobs, slide each side to the next detent, then release until you feel a solid click.
3. Break-In and Fine Tuning
Give yourself two to three rides to get comfortable with QuickSet. Try different width settings and minor angle tweaks. Most riders find a combination that feels right after a few rides.
Comfort Guarantee and Warranty
We want you to enjoy every mile on your QuickSet seat.
- 30-Day Comfort Guarantee — return within 30 days for a full refund if it isn’t more comfortable
- 1-Year Warranty — manufacturing defects replaced within the first year
Proof of purchase is required for returns or warranty service.
If You Are Just Checking It Out
You may have spotted this seat on a rack, a rental bike, or a friend's e-bike. QuickSet is built for riders who want real comfort on real rides, without chasing a new seat every season.
"By the end of the ride, I was pleasantly surprised. No soreness, no lingering pressure. That is a win."
— Wayne, e-bike rider, Rice, MN
Wayne and Joan ride long rail trails and helped shape the final design.
Comfort isn’t just about padding — it’s about being able to change where the pressure goes. QuickSet lets you reset contact points with a quick slide and click.
How QuickSet Works
When pressure builds, you adjust the width instead of ending the ride. Two seat halves pivot at the front and slide at the rear, locking into three preset widths with stainless spring plungers.
Spring-loaded plungers lock into precise detents for each width setting.
Three Simple Steps
- Pull the plunger knobs
- Slide to Sport, Casual, or Cruiser
- Release until you feel a click
Install QuickSet once using the standard dual-rail mount. After that, width changes are tool-free and can be done mid-ride.
Why Width Changes Help With Comfort
Fixed seats keep pressure in one spot. Each QuickSet width shifts contact slightly so hot spots recover while new areas take the load.
Small width changes can make a big difference in pressure distribution.
Instead of ending a ride early, you change where the pressure goes — and keep riding comfortably.
See the Full Build and Testing Story
Tell Us How Your Ride Feels
Your feedback helps us improve the seat and support future riders.
Adjust. Ride. Repeat.
Whether you own QuickSet or just found it on a rack — glad you landed here.